17.
Lift the antennas (2) and cables (3) straight up out of the display enclosure.
CAUTION: When installing the display assembly, be sure that the wireless antenna cables are
routed and arranged properly.
Failure to properly route the antennas can result in degradation of the computer's WLAN
performance.
18. If you need to remove the WWAN antennas, remove the antenna cables from the clips (1) and
routing paths built into the display enclosure.
19. Lift the antennas (2) and cables (3) straight up out of the display enclosure.
CAUTION: When installing the display assembly, be sure that the wireless antenna cables are
routed and arranged properly.
Failure to properly route the antennas can result in degradation of the computer's WWAN
performance.
Reverse this procedure to reassemble and install the display assembly.
120 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
