c. Remove the WLAN antenna cables and transceivers. The WLAN antenna cables and
transceivers are included in the Antenna Kit, spare part number 702876-001.
10. If it is necessary to replace the WWAN antenna cables and transceivers:
WLAN and WWAN antennas are available in the Antenna Kit, spare part number 702876-001.
a. Release the WWAN antenna transceivers (1) from the clips built into the display enclosure.
(The WWAN antenna transceivers are attached to the display enclosure with double-
sided tape.)
b. Detach the WWAN antenna cables from the routing channels (2) built into the display
enclosure.
c. Remove the WWAN antenna cables and transceivers. The WWAN antenna cables and
transceivers are included in the Antenna Kit, spare part number 702876-001.
84 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
