HP En3700 - JetDirect Print Server User Manual

2-4 User Guide
Chapter 2 Installing the print server
3. Plug the DC power cord from the power module—shipped with the print
server—into the power connector on the back of the print server. Plug the power
module into a power outlet.
• Caution! Do not use the power module shipped with your print server with any
other products!
4. Verify the print server’s LEDs:
• The 10 or 100 LED on the rear end of the print server lights green to indicate the
connection speed.

HP En3700 - JetDirect Print Server Specifications

General

Brand	HP
Model	En3700 - JetDirect Print Server
Category	Print Server
Language	English