HP ESG E4400B - Installation Kit Parts List; Tools Required; Equipment Required

Installation Note E4400-90235 3
HP ESG E4400B, E4420B, E4421B, E4422B and HP ESG-D
E4430B, E4431B, E4432B, E4433B Series Signal Generators
Firmware Upgrade Kit: Part Number E4400-60174
Introduction
The firmware revision is changed by downloading the updated firmware files via computer RS-232
interface or the HP Access Website. This installation note includes separate procedures for PC, laptop,
or palmtop computers.
Installation Kit Parts List
Table 1 Parts Kit E4400-60174 Contents
Tools Required
❏ 5-mm nut driver, HP part number 8710-1219
Equipment Required
The computer controller may be a PC (IBM compatible), laptop (HP OmniBook), or palmtop
(HP 200LX). Notice that the palmtop must have 256 kB available memory for DOS. The required
equipment is listed under each procedure.
NOTE A kit containing the RS-232 parts listed in each procedure can be obtained by ordering the
RS-232 Cable Kit, HP part number E4400-60049.
Product Affected: . . . . . . . . . . . . . . . . . . . . . . . . HP ESG E4400B, E4420B, E4421B, E4422B
HP ESG-D E4430B, E4431B, E4432B, E4433B
Series Signal Generators
Serial Numbers: . . . . . . . . . . . . . . . . . . . . . . . . All
Options: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All
To Be Performed By: . . . . . . . . . . . . . . . . . . . . . . (X) HP Service Center
(X) Personnel Qualified by HP
(X) Customer
Estimated Installation Time: . . . . . . . . . . . . . . 1 hour
Estimated Verification Time: . . . . . . . . . . . . . . 1 minute
Item Quantity Description Part Number
1 1 Firmware DOS disk upgrade E4400-10007
2 1 RS-232 Cable Kit E4400-60049
3 1 Installation Note E4400-90235