HP f965w - 2 Getting Started; Power Connection and LED Indicators

11
4. Adjust view angle.
2.3 Connect to Power
Use only the supplied car charger to power up the camcorder.
1. Connect one end of the car charger to the USB connector of the
camcorder. USB port input: DC 5V / 2A.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car charger input: DC 12 / 24V.
2.4 LED Indicator
Status Explanation LED Indicator Color
Power on, standby Solid Red Light
Recording/
Recording and screen off
Flash Red Light