End a connection
It can be useful to end a connection when you are done using it. This frees resources on your HP iPAQ
and can save connection charges.
●
When connected via a modem or VPN, tap Connections > Disconnect.
●
When connected via cable, detach your HP iPAQ from the cable.
●
When connected via Bluetooth, tap Start > Settings > Connections > Bluetooth > Bluetooth
Manager > Active Connection. Tap and hold the connection name, and then tap Disconnect.
●
When connected via a network (Ethernet) card, remove the card from your HP iPAQ.
30 Chapter 6 Connections
To Next Page
Loading...
