RX2660 BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 11 of 11
20. The rx2660 will first try to use the PDQVSA entry hereafter. This setting will survive a disconnection from
the main power (as long as the MP battery is good).
21. Disconnect from the Console by pressing <Ctrl-b>, then disconnect from the MP by pressing <x>.
SYSTEM job terminated at DECEMBER 8, 2018 04:09 PM
Accounting information:
Buffered I/O count: 8345 Peak working set size: 10272
Direct I/O count: 4343 Peak virtual size: 257120
Page faults: 20407 Mounted volumes: 0
Charged CPU time: 0 00:00:02.46 Elapsed time: 0 00:00:38.74
22. Press <Ctrl-b>:
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
[pdqvca] MP> x
Remote connection closed.
PDQVSA$