EasyManua.ls Logo

HP Integrity rx2800 - i2 - User Manual

HP Integrity rx2800 - i2
151 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HP Integrity rx2800 i2 Server User Service
Guide
HP Part Number: AH395-9004A
Published: November 2010
Edition: 1

Table of Contents

Other manuals for HP Integrity rx2800 - i2

Questions and Answers

  • A
    Austin BestJul 26, 2025
    Why does pressing the power button on my HP Integrity rx2800 - i2 Server do nothing?
    • S
      Sabrina FlemingJul 26, 2025
      If the power is off and not connected to the server power supplies, pressing the power button on the HP Server will have no effect.
  • A
    Angela FigueroaAug 1, 2025
    How to troubleshoot HP Integrity rx2800 - i2 that does not power on?
    • Q
      qgomezAug 1, 2025
      If your HP Server doesn't power on, first verify the power source. Ensure it is properly connected and functioning before proceeding with further troubleshooting.
  • B
    Brittany GuerreroAug 6, 2025
    What to do if HP Integrity rx2800 - i2 Server has initial operation issues?
    • N
      Nicole CastroAug 6, 2025
      If you encounter initial operation issues with your HP Server, remove any add-in or optional components. After removing these components, retest the server to see if the issue is resolved before continuing.
  • J
    Justin HayesAug 19, 2025
    What to do if RBSU is inaccessible in HP Software?
    • D
      Denise ChavezAug 19, 2025
      If RBSU is inaccessible in HP Software, switch ROM images by changing the switch settings on the system configuration switch.
  • M
    malikliuNov 12, 2025
    What to do if I receive an HP SUM Connection Error or Discovery Failed message in HP Software?
    • C
      carolyngonzalesNov 12, 2025
      If you receive an HP SUM Connection Error or Discovery Failed message, several factors could be at play. First, ensure your workstation doesn't have an existing connection to the ADMIN$ share on the target IP address and that the target server’s admin$ share is accessible. Also, verify the user ID used to connect to the target IP address server is part of the administrator’s group. For Windows targets, confirm WMI is enabled and running. For Linux, check that the SSH port isn't blocked, and the target server can be contacted through SSH with the scp command available. In rare cases, disconnect external storage until firmware updates are complete. Ensure firewall ports on network routers are documented. If you're using SEP, disable the Network Threat Analysis feature during HP SUM use. Fina...

HP Integrity rx2800 - i2 Specifications

General IconGeneral
Number of Processors1 or 2
Expansion Slots6 PCI-X slots
RAID SupportYes
Network ControllerIntegrated dual Gigabit Ethernet
Operating SystemsHP-UX, Linux, Windows Server
Form Factor2U rackmount
StorageUp to 1.8TB
NetworkEthernet

Related product manuals