HP Integrity rx2800 - i2 User Manual

Figure 9 hot plug SAS disk drive LEDs
21
Drive status LEDDrive activity LED
Table 6 SAS disk drive LEDs
IndicationDrive status LED statusDrive activity LED status
The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a
management application.
Alternating amber and
blue
On, off, or flashing
The drive is operating normally, and it has been selected
by a management application.
BlueOn, off, or flashing
A predictive failure alert has been received for this drive.
IMPORTANT: Replace the drive as soon as possible.
Regularly flashing amber
(1 Hz)
On
The drive is online, but it is not active currently.OffOn
CAUTION: Do not remove the drive. Removing a drive
may terminate the current operation and cause data loss.
The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert
has been received for this drive. To minimize the risk of data
loss, do not replace the drive until the expansion or
migration is complete.
Regularly flashing amber
(1 Hz)
Flashing regularly (1 Hz)
CAUTION: Do not remove the drive. Removing a drive
may terminate the current operation and cause data loss.
The drive is rebuilding, erasing, or it is part of an array that
is undergoing capacity expansion or stripe migration.
OffFlashing regularly (1 Hz)
The drive is active, but a predictive failure alert has been
received for this drive. Replace the drive as soon as possible.
Regularly flashing amber
(1 Hz)
Flashing irregularly
The drive is active, and it is operating normally.OffFlashing irregularly
A critical fault condition has been identified for this drive,
and the controller has placed it offline. Replace the drive as
soon as possible.
AmberOff
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
Regularly flashing amber
(1 Hz)
Off
The drive is offline, a spare, or not configured as part of an
array.
OffOff
Optical drive
The server has one SATA DVD+RW drive. This device has one activity LED.
Rear panel controls, ports, and LEDs
The server rear panel includes communication ports, I/O ports, USB ports, ac power connectors,
and the locator LED and button. LEDs located on the rear panel of the server signal the operational
status of the rear panel components.
Controls, ports, and LEDs 19

HP Integrity rx2800 - i2 Specifications

General

Brand	HP
Model	Integrity rx2800 - i2
Category	Server
Language	English