Need help?Do you have a question about the HP Integrity rx2620 and is the answer not in the manual?
Provides procedures for safely powering down the server using iLO MP or the power button.
Details the steps for powering on the server from standby mode using iLO MP or the power button.
Outlines essential Electrostatic Discharge (ESD) precautions for handling server components safely.
Details procedures for swapping hot-swappable fans, power supplies, and hot-pluggable hard drives.
Guides the user through the process of removing and replacing the server's power supply units.
Details the procedure for removing and replacing internal hot-pluggable hard disk drives.
Provides step-by-step instructions for removing and installing server memory modules (DIMMs).
Guides the user through the process of removing and replacing server processors.
Provides detailed steps for removing and replacing the server's main system board.
Offers general advice and a methodology for diagnosing and resolving server issues.
Lists common server problems and provides potential solutions and troubleshooting steps.
Guides users on identifying problems and the corresponding Field Replaceable Units (FRUs) for repair.
Details how server LEDs, diagnostic LEDs, and the SEL aid in identifying hardware issues.
Introduces the suite of offline and online diagnostic tools available for server troubleshooting.
Covers procedures for booting and shutting down the HP-UX operating system.
Details procedures for booting and shutting down the HP OpenVMS operating system.
Provides steps for booting and shutting down Microsoft Windows on the server.
Covers procedures for booting and shutting down Linux distributions on the server.
Provides an overview of the Integrated Lights-Out Management Processor (iLO MP) for remote server management.
Details the steps to configure a static or DHCP IP address for the iLO MP LAN interface.
Provides a reference for commands available through the iLO MP's command line interface.
To Next Page
General