HP Integrity rx6600 - Service Manual

Other manuals for HP Integrity rx6600

Hardware Quick Start Guide2 pages

Deployment Guide105 pages

Installation Guide84 pages

Documentation Update1 page

Questions and Answers

C
Christian ParsonsJul 26, 2025
Why my HP Integrity rx6600 Server does not power on?
- W
  William DavisJul 26, 2025
  If your HP Server does not power on, start by checking if the AC In indicators are lit, which means power is available to the server. If a fault indicator is lit, try reseating the power supply. If the issue continues, reseat the boards inside the server. If it still doesn't work, replace the power supply or the power supply interface board. If the AC Out indicators are lit, it means the server circuits have power. If the console shows the server is on, but the LEDs indicate otherwise, reseat connectors on the LED status board, and if needed, replace the LED status board. If the console indicates the server is off, reseat connectors on the system board, and if the problem remains, replace the power supply interface board, the iLO 2 MP board, or the system board.
T
Tyler AndersonJul 31, 2025
What to do if my HP Server has intermittent problems?
- B
  bgarciaAug 1, 2025
  For intermittent problems with your HP Server: 1. Check the iLO 2 MP logs to analyze the issue and see if there's more than one symptom or if the problem seems random. 2. Make sure the AC power source is stable. 3. Reseat all connectors on the rear panel. 4. Reseat all hot-swappable fans and power supplies. 5. Reseat all main memory DIMMs. 6. Reseat all cable harnesses and board connectors.
P
Patricia WilliamsAug 7, 2025
How to troubleshoot hard drive problems on HP Integrity rx6600 Server?
- K
  Kimberly CaseAug 7, 2025
  To resolve hard drive problems on your HP Server: 1. Remove and reinsert the hard drive. 2. Swap the hard drive with one from another slot or a known good spare. 3. Remove and reinstall the hard drive backplane, ensuring connectors are fully engaged. 4. Replace the hard drive backplane if necessary. 5. Replace the SAS core I/O card.
L
Leslie OsborneAug 12, 2025
What to do if I have DVD Problems with my HP Integrity rx6600 Server?
- Q
  qmortonAug 13, 2025
  To troubleshoot DVD problems with your HP Server: 1. Remove and reinsert the DVD. 2. Replace the DVD. 3. Remove and reinstall the DVD drive, ensuring all connectors are fully engaged. 4. If the issue persists, replace the DVD drive.
J
Jessica PhillipsAug 18, 2025
How to fix console problems on HP Integrity rx6600 Server?
- T
  Thomas LewisAug 19, 2025
  To address console problems on your HP Server: 1. Check the monitor controls and adjust contrast and brightness as needed. 2. Inspect all power and interconnecting cables, ensuring all console connectors are fully engaged. 3. Check that all iLO 2 MP board connectors are fully engaged. 4. Use the self-test features of the console software.

HP Integrity rx6600 Specifications

General

Processor	Intel Itanium 2
Network	Integrated dual Gigabit Ethernet
Form Factor	5U rack-mountable
Power Supply	Redundant hot-plug power supplies
Processor Speed	1.6 GHz
Memory Type	DDR2 ECC Registered
RAID Support	Yes
Operating System	HP-UX, Linux, Windows Server