HP Integrity rx6600 Server Documentation Update
Read This First
Documentation Update for the HP Integrity rx6600 Server Installation Guide (AB464-9001C)
On page 40 in the Replacing the System Board procedure, Step 3 incorrectly states:
3. Slide the processor board assembly into the chassis until it begins to seat into the
socket located on the midplane board.
The corrected Step 3 should state:
3. Slide the processor board assembly into the chassis. Press firmly on the lower bezel
until the processor board assembly is fully seated into the midplane board.
How to Provide Feedback for your Documentation
If you have questions, comments, or suggestions regarding the documentation, please contact us using
the
http://docs.hp.com/en/feedback.html (web) or the docsfeedback@hp.com (
e-mail address). When
contacting us, please
supply the documentation title and part number located on the title page of the
manual. This information helps us direct your comments to the appropriate documentation team
within
HP.
July 2008
*5991-6032*
Need help?
General
