EasyManuals Logo

HP Integrity rx6600 Service Manual

HP Integrity rx6600
348 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
5. Exit the console and iLO 2 MP interfaces when finished using them.
Press Control-B to exit the system console and return to the MP Main Menu. To exit the iLO 2
MP, enter X at the Main Menu.
Booting HP-UX in Single-User Mode
To boot HP-UX in single-user mode, follow these steps:
1. Access the EFI Shell environment for the system on which you want to boot HP-UX in single-user
mode.
a. Log in to the iLO 2 MP and enter CO to select the system console.
b. Confirm that you are at the EFI Boot Manager menu. If you are at another EFI menu, select
Exit from the submenus until you return to the screen with the EFI Boot Manager heading.
c. From the EFI Boot Manager menu, select the EFI Shell to access the EFI Shell environment.
2. Access the EFI System Partition (fsX: where X is the file system number) for the device from
which you want to boot HP-UX.
3. Issue the HPUX command to initiate the \EFI\HPUX\HPUX.EFI loader on the device you
are accessing.
4. Boot to the HP-UX Boot Loader prompt (HPUX>) by pressing any key within the 10 seconds
given for interrupting the HP-UX boot process.
After you press a key, the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>)
launches. For help using the HPUX.EFI loader, enter the help command. To return to the
EFI Shell, enter exit.
fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64 Revision 1.723
Press Any Key to interrupt Autoboot
efi hpux AUTO ==> boot vmunix
Seconds left till autoboot - 9
[User types a key to stop the HP-UX boot process and access the HPUX.EFI loader. ]
Type ’help’ for help
HPUX>
5. At the HPUX.EFI (HPUX>) enter the boot -is vmunix command to boot HP-UX in single-user
mode.
HPUX> boot -is vmunix
> System Memory = 4063 MB
loading section 0
................................................... (complete)
loading section 1
........ (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
loading MFSFILES Directory(bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:25953K + Data:3715K + BSS:3637K = Total:33306K
Console is on a Serial Device
Booting kernel...
Booting and Shutting Down HP-UX 123

Table of Contents

Other manuals for HP Integrity rx6600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Integrity rx6600 and is the answer not in the manual?

HP Integrity rx6600 Specifications

General IconGeneral
ProcessorIntel Itanium 2
NetworkIntegrated dual Gigabit Ethernet
Form Factor5U rack-mountable
Power SupplyRedundant hot-plug power supplies
Processor Speed1.6 GHz
Memory TypeDDR2 ECC Registered
RAID SupportYes
Operating SystemHP-UX, Linux, Windows Server

Related product manuals