Operation
If specified with no parameters, monarch displays the Monarch processor for the system. Specifying
a processor number alters the preferred Monarch processor. None of these changes takes affect
until after a reboot.
Example 22 monarch command
Shell> monarch
Current Preferred
Monarch Monarch Possible Warnings
------- --------- -----------------
0 0
0 0
To view monarch: fs0 : monarch
| Processor
-----------------+-----------
current status | 0
next boot status | 0
To set the monarch processor to 1: fs0 :\ monarch 1
| Processor
-----------------+-----------
current status | 0
next boot status | 1
pdt
Displays or clears the contents of the Page Deallocation Table (PDT).
Syntax
pdt (clear)
Parameters
<clear> clears the pdt
Operation
With no options specified, pdt displays the PDT information for the system. You must clear the
PDT and reboot the system for memory reallocation and safe booting.
328 Utilities
To Next Page
Loading...
