HP Integrity rx6600 Service Manual

Table 28 Setup Checklist
XActionStep
Standard and Advanced
Preparation1 1. Determine access method to select and connect cables.
2. Determine LAN configuration method and assign IP address if
necessary.
There are three methods to configure the LAN for iLO 2 MP access:Configure the iLO 2 MP LAN2
• DHCP with DNS
• ARP Ping
• RS-232 serial port
Log in to the iLO 2 MP from a supported web browser or command
line using the default user name and password.
Log on to the iLO 2 MP3
Change the default user name and password on the administrator
account to your predefined selections.
Change default user name and password4
Set up the user accounts if using the local accounts feature.Set up user accounts5
Set up the security access settings.Set up security access6
Access the host console using method of choice.Access the host console7
Advanced
Activate advanced features by entering a license key.Activate Advanced Pack Features
1
1
For details on Advanced Pack Features, see the HP Integrity iLO 2 Operations Guide.
Setup Flowchart
Use this console setup flowchart as a guide to assist in the console setup process.
78 Installing the System

HP Integrity rx6600 Specifications

General

Processor	Intel Itanium 2
Network	Integrated dual Gigabit Ethernet
Form Factor	5U rack-mountable
Power Supply	Redundant hot-plug power supplies
Processor Speed	1.6 GHz
Memory Type	DDR2 ECC Registered
RAID Support	Yes
Operating System	HP-UX, Linux, Windows Server