3. Press sl to display the status logs. The status logs consist of:
• System Event
• Forward Progress
• Current Boot
• Previous Boot
• Live Events
• Clear SEL/FPL Logs
System Event Log (SEL) Review
1. Access the main menu under the iLO 2 MP’s command prompt (entering cm brings you to the
command menu).
2. Run the sl command. The Event Log Viewer menu displays:
SL
Event Log Viewer:
Log Name Entries % Full Latest Entry
-------------------------------------------------------------------
E - System Event 9 1 % 29 Oct 2002 19:15:05
F - Forward Progress 129 3 %
B - Current Boot 82
P - Previous Boot 0
C - Clear All Logs
L - Live Events
Enter your choice or {Q] to Quite:
3. Select e to review the system events. The Event Log Navigation menu displays:
Enter menu item or [Ctrl-B] to Quit: e
Log Name Entries % Full Latest Timestamped Entry
---------------------------------------------------------------------------
E - System Event 12 1 % 31 Oct 2003 23:37:45
Event Log Navigation Help:
+ View next block (forward in time, e.g. from 3 to 4)
- View previous block (backward in time, e.g. from 3 to 2)
<CR> Continue to the next or previous block
D Dump the entire log
F First entry
L Last entry
J Jump to entry number
H View mode configuration - Hex
K View mode configuration - Keyword
T View mode configuration - Text
A Alert Level Filter options
U Alert Level Unfiltered
? Display this Help menu
Q Quit and return to the Event Log Viewer Menu
Ctrl-B Exit command, and return to the MP Main Menu
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >a
Alert Level Threshold Filter:
1 : Major Forward Progress
2 : Informational
3 : Warning
5 : Critical
7 : Fatal
Enter alert level threshold or [Q] to quit filter setup: 3
-> Alert threshold level 3 filter will be applied.
150 Troubleshooting
To Next Page
Loading...
Need help?
General
