HP Integrity rx2620 - Command Line Interface; Command Line Interface Menu; Table 5-21. Power Supply Errors

Chapter 5
Troubleshooting
Command Line Interface
128
Command Line Interface
The baseboard management controller (BMC) is accessable by means of the BMC console commands, or
command line interface (CLI). The commands are similar to the iLO MP commands but are slightly less
interactive.
Command Line Interface Menu
The command line interface (CLI) provides the following menu selections:
date: Date display
help: List available commands
ipmi: Send IPMI cmd
loc: System locator LED
passwd: Change password
pc: Power control
pr: Power restore policy
ps: Power status
rs: System reset
sl: Show logs
sr: Display firmware revisions
tc: System reset
exit: Exit
Table 5-21 Power Supply Errors
System
LED
LED 1 LED 2 LED 3 LED 4 Problem Solution
Flashing
Red
OFF RED OFF RED VRM or power pod
fault
View the SEL for
additional information.
Flashing
Red
GREEN RED OFF RED Power Supply 1
fault
Flashing
Red
OFF RED GREEN RED Power Supply 2
fault
Flashing
Red
GREEN RED GREEN RED 12V out of range
(power supply
interface fault)