Chapter 4
45
4 Removing and Replacing Components
This chapter describes the procedure for removing and replacing the different components in the HP Integrity
rx2620 server.
This chapter addresses the following topics:
• “ESD Information” on page 46
• “Service Tools Required” on page 46
• “Location of Internal Components and Connectors” on page 47
• “Removing and Replacing System Top Metal Cover and Bezels” on page 49
• “Removing and Replacing Hot-Swap and Hot-Plug Devices” on page 53
• “Removing and Replacing Internal Components” on page 61
To Next Page
Loading...
