HP Integrity rx2800 - i2 User Manual

• The hex code for each event log is 128 bits long with an architected format:
Some enumerated fields can be mapped to defined text strings.◦
◦ All can be displayed in hex, keyword, or text mode.
• Events are created by firmware or OS code, and are sent over the PDH bus to the BMC for
storage in either or both of the SEL and FP logs (HP-UX shows an I/O path for the BMC).
• The iLO 3 MP can display event logs: SEL events are sent over the IPMB, between the BMC
and the iLO 3 MP.
• Event logs can also be read back over the PDH bus by software (for example, the IPMI driver
or agent) for storage on disk.
Using event logs
To consult the event logs:
1. Connect to the system console.
2. Use Ctrl-B to access the iLO 3 MP menu.
3. Use the sl command to view event logs: System Event (E) and Forward Progress (F) logs are
very useful in determining the context of an error (See the following figure for an example):
NOTE: Remember that:
• E shows only event logs for Warning, Critical, or Fatal faults by default; F shows all event log
outputs.
• System Event Logs (SELs) are never overwritten, unless they are first manually cleared: since
they employ ring buffering, oldest logs get overwritten first. Forward Progress Logs (FPL) are
circular and contain additional, non-critical information.
• The alert threshold can be changed.
iLO 3 MP event logs
The iLO 3 MP provides diagnostic and configuration capabilities. See the HP Integrity iLO 3
Operations Guide for details on the iLO 3 MP commands. To access the iLO 3 MP, do the following:
NOTE: The iLO 3 MP must be accessed from a terminal console which has access to the iLO 3
MP.
1. Login with proper username and password.
NOTE: Default operator login and password: login = oper, password = oper.
2. Press cl to display the console history log. This log displays console history from oldest to
newest.
3. Press sl to display the status logs. The status logs consist of:
• System Event
• Forward Progress
• iLO Event
• Cllear SEL and FPL
• Live Events
4. For a more information on configuring the iLO 3 MP and using the iLO 3 MP commands, see
the HP Integrity iLO 3 MP Operations Guides.
Errors and reading error logs 81

HP Integrity rx2800 - i2 Specifications

General

Number of Processors	1 or 2
Expansion Slots	6 PCI-X slots
RAID Support	Yes
Network Controller	Integrated dual Gigabit Ethernet
Operating Systems	HP-UX, Linux, Windows Server
Form Factor	2U rackmount
Storage	Up to 1.8TB
Network	Ethernet