HP Integrity rx2800 - i2 User Manual

DIMMs
For memory configurations see “DIMMs” (page 34).
To remove the component:
1. power off the server (“power off the server” (page 102)).
2. Extend or remove the server from the rack (“Remove the server from the rack” (page 102) or
“Extend the server from the rack” (page 99)).
3. Remove the access panel (“Removing the access panel” (page 30)).
4. Remove the memory riser.
5. Remove the DIMM.
To replace the component see “DIMMs” (page 34).
120 Removal and replacement procedures

HP Integrity rx2800 - i2 Specifications

General

Number of Processors	1 or 2
Expansion Slots	6 PCI-X slots
RAID Support	Yes
Network Controller	Integrated dual Gigabit Ethernet
Operating Systems	HP-UX, Linux, Windows Server
Form Factor	2U rackmount
Storage	Up to 1.8TB
Network	Ethernet