HP Integrity rx2800 - i2 User Manual

IMPORTANT: SAS hard drives are loaded in sequence, starting with slot 1.
Save the hard drive filler for future use. For airflow purposes, place hard drive fillers in slots that
do not contain hard drives.
1. Remove the hard drive filler, by squeezing the tab and pulling out the filler.
2. Install the hard drive, by pushing in the drive and closing the locking lever.
Installing a hot-swappable power supply
The server has at least one hot-swappable power supply installed before shipping. This power
supply is located at the rear of the server. You can install a second, optional power supply to
provide 1+1 capability.
Figure 12 Power supply loading guidelines
Installing additional components 29

HP Integrity rx2800 - i2 Specifications

General

Number of Processors	1 or 2
Expansion Slots	6 PCI-X slots
RAID Support	Yes
Network Controller	Integrated dual Gigabit Ethernet
Operating Systems	HP-UX, Linux, Windows Server
Form Factor	2U rackmount
Storage	Up to 1.8TB
Network	Ethernet