MSA RAID and controller configuration.
This folder also contains sample standard
array configuration files that can be
applied to Smart Array controllers with
the hpacuscripting tool.
This file is created when the
readhwconfig option is executed.
conrep.dat A file into which the conrep tool saves
the values of the EFI variables contained
in the conrep.xml configuration file.
This file is created when the readhwconf
action is executed.
hwdisc.dat The hwdiscovery output file that
contains a system inventory to be used
by the ifhw and hwquery utilities.
This file is created when the readhwconf
action is executed.
hba-qlogic.ini
The QLogic HBA configuration file, used
to enable or disable boot devices on
QLogic host bus adapters (HBAs).
This file is created when the readhwconf
action is executed.
hba-emulex.ini
The Emulex HBA configuration file, used
to enable or disable the boot devices on
Emulex HBAs.
This file is created when the readhwconf
action is executed.
logs
This folder stores log files that are created
during SSTK execution. Use the log files
to monitor the deployment process and
to troubleshoot any problems.
os
Contains Windows Server 2008 SP2 and Windows Server 2008 R2 installation
files and their respective answer files for unattended installations. See
“Uploading the Windows installation files” (page 26).
scripts
Contains the following SSTK Windows configuration and installation scripts
that control SSTK execution, run the utilities, and deploy Windows:
SSTKConfig
The main SSTK configuration file in
which you set the action for SSTK to take
each time a system boots to SSTK WinPE.
You must edit this script before initiating
an OS deployment. See “Editing the
SSTKConfig.cmd file” (page 30).
SSTKMain
Controls the SSTK execution depending
on the configured action.
ReadHWConf
Called if the configured action is
readhwconf. It calls hwdiscovery,
conrep, the Emulex and QLogic
configuration tools, and
12 Overview
To Next Page
Loading...
