5.0.1b352.03af2.029.1.7.17HP 81Q (AK344A)
SANsurfer utilitySCSI-
port/STORport
Multiboot im-
age
2
BIOS
SCSIport
3
/STORport
1
4 Gb HBAs
5.0.0b19 /5.0.1b351.73af2.029.1.3.11/9.1.7.17FC1142SR (AE311A)
5.0.0b19 /5.0.1b351.73af2.029.1.3.11/9.1.7.17FC1242SR (AE312A)
5.0.0b19 /5.0.1b351.73af2.029.1.3.11/9.1.3.18
QMH2462 4Gb c-class
Mezz (403619-B21)
5.0.0b19 /5.0.1b351.73af2.029.1.3.11/9.1.7.17FC1243 (AE369A)
5.0.0b19 /5.0.1b351.73af2.029.1.3.11/9.1.7.17FC1143 (AB429A)
SANsurfer utilitySCSI-
port/STORport
Multiboot im-
age
2
BIOS
SCSIport
3
/STORport
1
2 Gb HBAs
5.0.0b19/5.0.1b35n/a1.459.1.3.11/9.1.7.17FCA2214 (281541-B21)
5.0.0b19/5.0.1b35n/a1.459.1.3.11/9.1.7.17
FCA2214DC (381881-
B21)
5.0.0b19/5.0.1b35n/a1.459.1.3.11/9.1.7.17
HP BL20p G3, G4 FC
(361426-B21)
5.0.0b19/5.0.1b35n/a1.489.1.3.11/9.1.7.17
HP BL25p/BL45p G2
(381881-B21)
5.0.0b19/5.0.1b35n/a1.459.1.3.11/9.1.7.17
HP BL30p/BL35p Dual-Port
FC Mezz (354054-B21)
5.0.0b19/5.0.1b35n/a1.459.1.3.11/9.1.7.17
HP BL20p G2 FC Mezz
(300874-B21)
1
Driver installation with HP Smart Component requires a minimum Windows Server 2003 SP1/SP2 with KB932755. Apply
the Microsoft STORport update (KB932755) before installing or upgrading to this version of the STORport driver. For boot
installations, the Windows Server 2003 SP2 install image is required followed by the KB update.
2
Multiboot images contain the BIOS and EFI drivers for the 4Gb and 8 Gb HBAs.
3
Only supported on WS2003.
Integrity server support
The following HBAs are supported on Integrity servers with Enterprise and Datacenter versions of:
• Windows Server 2003, IA64 SP1, SP2 (STORport only)
• Windows Server 2008, IA64 (STORport only)
Table 2 HBA Support for Integrity Servers
SANsurfer
Multiboot image
2
EFI
STORport
1
8 Gb HBAs
5.0.1b372.03af2.019.1.7.29
HP PCIe 1p 8Gb FC QLogic HBA
(AH400A)
5.0.1b372.03af2.019.1.7.29
HP PCIe 2p 8Gb FC QLogic HBA
(AH401A)
HP StorageWorks QLogic Fibre Channel host bus adapters for ProLiant and Integrity servers using
Windows and VMware operating systems release notes 5