3–10 User Guide
Setting Up the Monitor
✎
You can change your monitor’s viewing position to portrait. To
rotate your display and view information on your screen in
portrait mode, you will need to install the Pivot software available
on www.hp.com/support or from the Portrait Display Web site,
www.portrait.com. On the HP Web site, follow the links for your
monitor to the software and drivers download page.
Pivoting the Monitor
6. Press the power switch to turn on the computer, and then
press the master power switch on the rear of the LCD and the
power button on the front of the monitor.
Ä
CAUTION: Burn-in image damage may occur on monitors that
display the same static image on screen for a prolonged period of
time. To avoid burn-in image damage on your monitor screen, you
should always activate a screen saver application or turn off the
monitor when it is not in use for a prolonged period of time. Image
retention is a condition that may occur on all LCD screens.
To Next Page
Loading...
Need help?
General
