3–6 User Guide
Setting Up the Monitor
Connecting the Monitor
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect one end of the USB hub cable to the USB connector
on the rear panel of the computer, and the other end to the
upstream USB connector on the monitor.
Connecting the USB Cable
Å
WARNING: To reduce the risk of electric shock or damage to your
equipment:
■ Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
■ Disconnect power from the monitor by unplugging the power
cord from the electrical outlet.
■ Do not place anything on power cords or cables. Arrange them
so that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
To Next Page
Loading...
