To configure the clock:
1.
Tap
to configure the clock. You can choose between analog and digital modes, and set up
a world clock that shows three time zones at the same time.
2. To set up the world clock, tap the Main clock title and timezone tab and choose your local time
zone from the list selector.
3.
To confirm your selection, tap
.
You can set the other two time zones in a similar way. To set the time, tap
Time
4:43 PM
.
Tap
to see a full screen view of the clock. Tap on the screen to display the menu buttons again.
To set an alarm:
1.
Tap
to enter the Alarm menu.
2.
Tap
to set an alarm.
3. In the Description menu, enter the text to be displayed when the alarm rings.
4. Set the time of the alarm by tapping Time.
NOTE: You can snooze the alarm. To set the length of delay, select the required minutes from
the list.
5.
Tap
to confirm your selection.
The following types of alarms are available:
●
Once: The alarm is not recurrent.
●
Regular: The alarm is recurrent. Here, you can choose the days of the week you require an alarm.
●
Countdown: The alarm alerts after the specified delay.
●
Call back: A link to the Contact list is displayed at the bottom of the screen. You can choose the
contact you need to be reminded to call back.
NOTE: Tap to save your selections. If you do not need the alarm, tap .
TIP: When setting the alarm time, you can change the time by dragging the minute hand of the analog
clock.
To modify an alarm:
1. Tap an alarm entry in the list to display the detailed settings of the alarm.
2.
To edit or delete a preset alarm, tap
.
NOTE: To delete all your alarms, tap from the Alarm list screen.
26 Chapter 8 Discovering the Travel Companion through the Startup menu
To Next Page
Loading...