EasyManua.ls Logo

HP iPAQ rx5700 - Product Specifications; System Specifications

HP iPAQ rx5700
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 Product Specifications
System Specifications
NOTE Not all models described are available in all regions. For more information on
specifications for your particular model, on your HP iPAQ, tap Start > Settings > System tab
> System Details.
System Feature Description
Processor Samsung SC32442 Processor 400MHz
Operating System Microsoft® Windows Mobile® 5.0 software for Pocket PC
Memory Up to 2.0 GB flash ROM for persistent storage, depending on
model
64 MB SDRAM for running applications
External Power AC Input: 100~240 Vac, 50/60 Hz, AC Input current: 0.2 A ac
max Output Voltage: 5Vdc (typical)
Display 3.5 in (89 mm) diagonal transmissive QVGA color, 16-bit, 64K
color, 240 x 320 pixels, 0.24 dot pitch, with LED backlight,
power save mode, and antiglare coating
LED Backlight Multi-level brightness adjustment with power save mode
SD Slot Supports SD memory and 4-bit SDIO
Antenna Internal Bluetooth antenna and internal WLAN antenna (WLAN
is available on rx5900 series models only)
Audio Integrated microphone, speaker, and one 3.5–mm stereo
headset jack, 5–band equalizer and 3D sound adjustment
Battery 1,700 mAh Li-ion removable/rechargeable battery
Wireless LAN Integrated 802.11b/g wireless LAN (rx5900 series models
only)
Bluetooth Bluetooth 2.0 with Enhanced Data Rate, typical 10 meter range
(approximately 33 feet)—High-speed, low-power, short-range
wireless communication with other Bluetooth devices
LED Indicators:
Charge and Notification LED
Flashing amber indicates an event notification or alarm
on your HP iPAQ.
Solid amber indicates unit is charging.
Solid green indicates unit is fully charged.
Wireless LED
Flashing blue indicates either or both:
Bluetooth is on
142Chapter 19 Product Specifications

Table of Contents

Related product manuals