HP iPAQ rx5700 - Using the Alarm

Using the Alarm
To set the alarm:
1. Tap the bell icon on the Clocks screen to access the alarm settings screen.
2. Select Set alarm for, and then set the alarm time.
3. If you want a sound to play when the alarm goes off, select Play sound, and then select an alarm
sound from the list.
4. If you want a message to display when the alarm goes off, type the message in the Message box.
5. Tap OK.
Icons indicating the alarm is on display around the bell icon after you turn on the alarm.
Your Travel Companion displays the Alarm screen when the alarm sounds.
50Chapter 6 WorldMate