HP J8692A - Page 285

To Next Page

To Previous Page

5-67

Quality of Service: Managing Bandwidth More Effectively

Globally-Configured QoS

Figure 5-30. Displaying the Current DSCP-Priority Mapping in the DSCP Policy Table

2. Configure the priorities for the DSCPs that you want to use to mark

matching packets.

HP Switch(config)# show qos dscp-map

DSCP -> 802.p priority mappings

NOTE: ‘qos type-of-service diff-services’ must be configured

before DSCP is honored on inbound trafic.

DSCP CodePoint DSCP Value 802.1p tag DSCP Policy name

-------------- ---------- ----------- ---------------------------

000000 0 0 cs0

000001 1 No-override

000010 2 No-override

000011 3 No-override

000100 4 No-override

000101 5 No-override

000110 6 No-override

000111 7 No-override

001000 8 1 cs1

001001 9 No-override

001010 10 No-override af11

001011 11 No-override

001100 12 No-override af12

001101 13 No-override

001110 14 No-override af13

001111 15 No-override

010000 16 2 cs2

010001 17 No-override

. . .

The DSCPs for this example

have not yet been assigned

an 802.1p priority level.

Other manuals for HP J8692A