HP J8693A User Manual

5-28
TACACS+ Authentication
Controlling WebAgent Access When Using TACACS+ Authentication
Controlling WebAgent Access When
Using TACACS+ Authentication
Configuring the switch for TACACS+ authentication does not affect WebAgent
access. To prevent unauthorized access through the WebAgent, do one or
more of the following:
■ Configure local authentication (a Manager user name and password
and, optionally, an Operator user name and password) on the switch.
■ Configure the switch’s Authorized IP Manager feature to allow
WebAgent access only from authorized management stations. (The
Authorized IP Manager feature does not interfere with TACACS+
operation.)
■ Disable WebAgent access to the switch by going to the System Infor-
mation screen in the Menu interface and configuring the Web Agent
Enabled parameter to No.

HP J8693A Specifications

General

Device Type	Switch
Model	J8693A
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Jumbo Frame Support	Yes
MAC Address Table	8000 entries
Manageable	Yes
Power Supply	Internal
Form Factor	1U
Management	Web, CLI, SNMP
Layer	Layer 2
Ports	24 x 10/100/1000 + 4 x shared SFP
Dimensions	17.3 x 10.2 x 1.7 in (44 x 26 x 4.3 cm)