13-31
Configuring Port-Based and User-Based Access Control (802.1X)
Configuring Switch Ports as 802.1X Authenticators
authorized guests will still be authorized on the port until they are removed
by a new authentication, an untagged authorization, a port state change, and
so on.
Configuring Mixed Port Access Mode
Figure 13-8. Example of Configuring Mixed Port Access Mode
Syntax: [no] aaa port-access <port-list> mixed
Enables or disables guests on ports with authenticated
clients.
Default: Disabled; guests do not have access
HP Switch(config)# aaa port-access 6 mixed
To Next Page
Loading...
Need help?
General
