HP JG640A - Internal Power Supplies

Internal Power Supplies
For AC PSUs JG527A or JG745A (JG722A, JG724A, JG723A, JG725A only) System (std 1// max 2) User Selection (min
0 // max 1)
For DC PSUs JG528A or JD366A (JG722A, JG724A, JG723A, JG725A only) System (std 0// max 2) User Selection (min
0 // max 2)
HP X351 300W AC Power Supply JG527A
See Configuration
Note:1, 2, 4
PDU Cable NA/MX/TW/JP JG527A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JG527A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord JG527A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X351 300W DC Power Supply JG528A#B01
See Configuration
Note:4
HP X351 150W AC Power Supply JG745A
See Configuration
Note:1, 2, 3
PDU Cable NA/MX/TW/JP JG745A
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JG745A
C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord JG745A
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
Note 2 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for Switch . (Offered
only in NA, Mexico, Taiwan, and Japan)
QuickSpecs
HP 830 Unified Wired-WLAN Switch Series
Configuration
DA - 14560 Worldwide — Version 8 — June 10, 2014 Page 12