EasyManuals Logo

HP L1750 User Manual

HP L1750
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
To take advantage of the sRGB support, you will need to change the monitor’s color temperature to
sRGB and install the sRGB color profile (ICM) file.
NOTE: The sRGB color temperature preset will improve the color accuracy of sRGB images on the
computer monitor, but some color variation may still occur.
Changing the Color Temperature
1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD.
2. Select Color.
3. Select sRGB.
4. Select Save and Return to exit the menu.
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP
NOTE: To complete the following procedure, you must be logged in as an administrator or a member
of the administrator’s group. If the computer is connected to a network, network policy settings may
prevent you from completing this procedure. The sRGB ICM file does not support Windows 95 and
Windows NT operating systems.
1. Click the Display icon in the Control Panel.
2. In the Display Properties windows, select the Settings tab, then click the Advanced button.
3. Select the Color Management tab, then click the Add button to open the Add Profile
Association dialog box.
4. Select the sRGB Color Space Profile.icm file, then click the Add button
5. To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select
sRGB Color Space Profile, then click Set as Default button.
6. Click Apply or OK.
Installing the sRGB ICM File for Microsoft Windows Vista
1. Click Appearance and Personalization icon in the Control Panel.
2. Click Personalization.
3. Click Display Settings.
4. Click the Advanced Settings button.
5. Click the Color Management tab, then click the Color Management button.
6. Click the Advanced tab, then click the Change System Defaults button.
7. On the Devices tab, click theAdd button.
8. Select the RGB Color Space Profile.icm file, then click the OK button.
9. To activate a color profile for the monitor, you must set it as the Default Monitor Profile. Select
sRGB Color Space Profile, then click the Set as Default button.
34 Chapter 4 Operating the Monitor

Table of Contents

Other manuals for HP L1750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP L1750 and is the answer not in the manual?

HP L1750 Specifications

General IconGeneral
3DNo
Aspect ratio16:9
Display diagonal17 \
Display resolution1280 x 1024 pixels
Vertical scan range50 - 77 Hz
Horizontal scan range24 - 83 kHz
Viewing angle, vertical160 °
Contrast ratio (dynamic)-
Contrast ratio (typical)800:1
Display brightness (typical)300 cd/m²
Supported graphics resolutions1280 x 1024 (SXGA)
On/off switchYes
Power consumption (standby)- W
USB Type-A downstream ports quantity0
Tilt angle range-5 - 35 °
Panel mounting interface- mm
Product colorSilver
Country of originChina
Cables includedAC
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)301 mm
Width (without stand)377 mm
Height (without stand)351 mm
Weight (without stand)6800 g

Related product manuals