HP L7010t User Manual

18
The monitor is off but it did
not seem to enter into
sleep mode.
The monitor's power
saving control is
disabled.
Open the OSD menu and select Power Control >
Auto-Sleep Mode and set auto-sleep to On .
OSD Lockout is displayed. The monitor's OSD
Lockout function is
enabled.
Press and hold the Menu button on the monitor bezel for
seconds to disable the OSD Lockout function.
Power Button Lockout is
displayed.
The monitor's power
button lockout function
is enabled.
Press and hold the monitor power button for seconds to
disable the power button lockout function.

HP L7010t Specifications

General

Pixel pitch	0.0565 x 0.1695 mm
Response time	30 ms
Display diagonal	10.1 \
Touch technology	Multi-touch
Display brightness	220 cd/m²
Display resolution	1280 x 800 pixels
Vertical scan range	50 - 76 Hz
Horizontal scan range	24 - 80 kHz
Touchscreen technology	Projected capacitive system
Contrast ratio (typical)	800:1
Viewing angle, horizontal	160 °
Product color	Black
Tilt angle range	-5 - 135 °
Country of origin	China
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	8.5 W
Power consumption (standby)	0.5 W
Power consumption (typical)	5.8 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Display viewable area (HxV)	216.96 x 135.6 mm
Panel mounting interface	100 x 100 mm
OmniTapps Multitouch compatibility	No
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	41.5 mm
Width	245.9 mm
Height	172.2 mm
Weight	1150 g