EN
Removal and Replacement
: Bottom assemblies
112
Paper feed assembly removal
Figure 4-51Removing the Paper Feed Assembly (continued on next page)
Prior to this step: Remove scanner, pods, doors, back cover, front cover, formatter,
and disconnect ECU cable, and remove ECU pan.
1
Disconnect the two cable connections.
2
Partially unwind the cables from their cable guides.
3
Remove the two screws securing the assembly to the printer chassis.
4
Lift paper feed frame away form chassis, being careful not to damage sensor
flags.
Note
Reassembly note: Be sure to seat the tab into the frame.
To Next Page
Loading...