The embedded Web server is available for the HP LaserJet 1320 Series printer over the
Internal HP Jetdirect network connection.
With the embedded Web server, you can gain access to the printer settings and information
by typing an IP address or hostname of the printer in a Web browser (such as Netscape
Navigator or Microsoft
®
Internet Explorer) on any computer. You can use the embedded
Web server to configure the printer, view status information, and obtain troubleshooting
information.
NOTE
These settings can also be changed by using the HP Toolbox.
The embedded Web server works with the following supported Web browsers:
● Internet Explorer 5.5 and later
● Netscape Navigator 4.75 and later
See
Using the embedded Web server for more information.
Software for Macintosh computers
The following sections describe the software for Macintosh computers that is available for
the HP LaserJet 1160 and HP LaserJet 1320 Series printers.
HP LaserJet 1160 printer
The following sections describe how to gain access to the Macintosh software for the
HP LaserJet 1160 printer.
Gaining access to the printer driver (Mac OS 9.2 and later)
1. From the Apple menu, select the Chooser.
2. On the top, left side of the Chooser dialog box, click HP LaserJet.
3. Select one of the following options, depending on how the computer and the printer are
connected:
● TCP/IP: In the dialog box, select yes to scan for TCP/IP network printers.
● USB: Go to step 4.
4. On the right side of the Chooser dialog box, click HP LaserJet 1160 printer.
5. Close the Chooser.
Gaining access to the printer driver (Mac OS X V10.1 and later)
1. The Print Center should automatically start. If it does not start, perform the following
steps:
a. Double-click the hard-drive icon on the desktop.
b. Open the Applications folder, and then open the Utilities folder.
ENWW Software 27
To Next Page
Loading...
