c. Double-click Print Center or Printer Setup Utility, depending on the operating
system.
2. Click Add. The Add Printer List dialog box appears.
3. Select one of the following options from the top menu, depending on how the computer
and the printer are connected:
● USB
● TCP/IP: For connecting to your TCP/IP printer in OS X V10.1, select ip printing.
For OS X V10.2 and later, select Rendezvous.
4. Select the printer name from the printer list.
5. Click Add.
HP LaserJet 1320 Series printer
The following sections describe how to access the Macintosh software for the
HP LaserJet 1320 Series printer.
Gaining access to the printer driver (Mac OS 9.2)
1. Double-click the hard-drive icon on the desktop.
2. Open the Applications folder, and then open the Utilities folder.
3. Start the Desktop Printer Utility.
4. Double-click Printer (USB).
5. In the USB Printer Selection section of the dialog box, click Change.
6. Select HP LaserJet 1320 Series printer.
7. Click Auto Setup.
8. Click Create.
9. Click Save.
Gaining access to the printer driver (Mac OS X V10.1 and later)
1. The Print Center should automatically start. If it does not start, perform the following
steps:
a. Double-click the hard-drive icon on the desktop.
b. Open the Applications folder, and then open the Utilities folder.
28 Chapter 2 Installation ENWW
To Next Page
Loading...
