Light status State of the printer Action
Job Cancel Pressing the G
O
button has no
effect.
After the cancellation process
is complete, the printer returns
to the Ready state.
Manual Feed or Continuable
Error
This state can occur in the
following circumstances:
● Manual feed
● Input tray is empty
● General continuable error
● Memory-configuration error
● Personality/job-related error
To recover from the error and
print whatever data is possible,
press the G
O
button.
If the recovery is successful,
the printer goes to the
Processing Data state and
completes the job.
If the recovery is unsuccessful,
the printer returns to the
Continuable Error state.
Attention
This state can occur in the
following circumstances:
● Input tray is empty
● Door is open
● Jam
● Misfeed from a tray
To reset the printer after a jam,
press the G
O
button.
You might need to clear the
error manually, and press the
G
O
button or close the top cover.
If the error persists, the printer
returns to the Attention state.
Table 3-2. Control-panel-light message (continued)
ENWW Status-light patterns 35
To Next Page
Loading...
