Light status State of the printer Action
Fatal Error Turn off the printer, wait 10
seconds, and turn on the printer.
See
Troubleshooting
Accessory Error
(HP LaserJet 1320 Series
printer only)
To see additional error
information, press the G
O
button. The light pattern
changes. For more information
about the light pattern that
appears, see
Troubleshooting.
When you release the G
O
button, the printer returns to the
initial Accessory Error state.
Cleaning Page
The cleaning page feature is
not available through the
control panel. The cleaning
page can be activated using
the HP Toolbox, which is
included as part of the overall
printer software package.
During cleaning mode,
pressing buttons has no effect.
The printer motor slows down
and the printer prints a page.
Table 3-2. Control-panel-light message (continued)
36 Chapter 3 Operation ENWW
To Next Page
Loading...
