EN
Changing the pickup roller
131
Changing the pickup roller
If the printer regularly mispicks (no
media feeds through or more than one
sheet feeds through), you might need to
change or clean the pickup roller. See
Accessories and ordering information
to
order a new pickup roller.
CAUTION
Failure to complete this procedure might
damage the printer.
1
Unplug the power cord from the
printer, and allow the printer to cool.
2
Open the toner door, and remove the
toner cartridge.
3
Find the pickup roller.
4
Release the small, white tabs on
either side of the pickup roller, and
rotate the pickup roller toward the
front.
Continued on next page.
3
2
4
1
To Next Page
Loading...
