132 Chapter 9 Troubleshooting the printer
EN
5 Gently pull the pickup roller up and
out.
6 Position the new or cleaned part in
the slot of the previous pickup roller.
See Cleaning the pickup roller
for
instructions.
Note
Circular and rectangular pegs on each
side prevent you from incorrectly
positioning the pickup roller.
7 Rotate the top of the new pickup
roller away from you until both sides
snap into place.
8 Reinstall the toner cartridge, and
close the toner door.
9 Plug the printer in to turn it back on.
5
6
7
8
9
To Next Page
Loading...
