C4170-90959
Troubleshooting with Control Panel Messages
105
NVRAM error (68 service)
(Secondary Error Message)
Replace the Formatter.
Scan buffer error (64 service)
(Secondary Error Message)
40064 Cycle power. If the message persists,
replace the Formatter.
Dynamic Ram controller error
(65 service)
(Secondary Error Message)
40065 Replace the Formatter.
Miscellaneous interface
hardware error (67 service)
(Secondary Error Message)
40067 1) Check the I/O connections.
2) Verify that the cable is IEEE 1284
compliant (if applicable).
Secondary Service Errors (continued)
Control Panel LED
Pattern
Secondary Error
Message
Status Log Code Recommended Action
To Next Page
Loading...