HP LaserJet 2200 - Macintosh Installation

ENWW
Specifications
23
English
WARNING!
Power requirements are based on the region where the printer is sold. Do not convert
operating voltages. This may damage the printer and void the product warranty.
Electrical Specifications 110-Volt Models 220-Volt Models
Power Requirements
100-127V (+/- 10%)
50/60 Hz (+/- 3 Hz)
220-240V (+/- 10%)
50/60 Hz (+/- 3 Hz)
Minimum recommended circuit capacity
for typical product
5.0 Amps 2.5 Amps
Average Power Consumption (Watts) -
(HP LaserJet 2200 series printer)
Printing (18 PPM) = 400 W
Standby = 12 W
PowerSave = 12 W
Off = 0 W
Printing (18 PPM) = 400 W
Standby = 12 W
PowerSave = 12 W
Off = 0 W
PowerSave default activation time is 15 minutes.
Values are subject to change. See http://www.hp.com/support/lj2200 for current information.
Environmental Specifications Operating Printing Storage/Standby
Temperature
(printer and toner cartridge)
15° to 32.5° C
(59° to 89° F)
-20° to 40° C
(-4° to 104° F)
Relative humidity
10% to 80% 10% to 90%
Acoustic Emissions
(HP LaserJet 2200) Bystander Position Declared Per ISO 9296
Printing (18 PPM) L
pAm
= 51 dB(A)
PowerSave Essentially inaudible
Sound Power Declared Per ISO 9296
Printing (18 PPM) L
WAd
= 6.6 bels(A)
PowerSave Essentially inaudible
You may wish to place printers with sound power equal to or greater than 6.3 bels in a separate room or cubicle.
Values are subject to change. See http://www.hp.com/support/lj2200 for current information.