90 Chapter 4 Problem Solving
EN
Wireless Printing Problems
Wireless Printing Problems
Symptom Possible Cause Solution
The connection cannot be
established or the
transmission seems to be
taking longer than usual.
Computer is not IrDA-
compliant.
Make sure the computer you
are using is IrDA-compliant;
look for an IrDA symbol on the
device or refer to the
computer’s manual.
IR Driver is not installed on
your computer or Personal
Digital Assistant (PDA).
Make sure your application is
using an HP LaserJet 2200
driver and that an IR port is
selected within the driver.
Keep in mind that complex
pages take longer to print.
HP does not supply the IR
driver for the computer port.
The IR driver is available
through the hardware or
operating system
manufacturers. Contact your
hardware or software technical
support to obtain a driver.
Computer and printer are not
positioned properly.
Make sure you have
positioned the device within
the range of operation and that
no objects, such as a finger,
paper, books, or bright light
are interfering with the
connection (see Printer
Specifications). Also make
sure the two FIR ports are
clean (free from dirt and
grease). See Cleaning the
Printer.
To Next Page
Loading...
