76 Chapter 4 Problem Solving
EN
The printer does not respond
when “print” is selected in the
software (continued).
The printer is malfunctioning. Check the lights on the printer
to determine if the printer is
indicating an error. See
Troubleshooting Control Panel
Messages or use the control
panel simulator.
Paper curls when exiting the
printer.
The paper curls when exiting
the top output bin.
Open the rear output bin to
allow the paper to exit in a
straight path through the
printer.
Turn over the paper that you
are printing on .
Troubleshooting General Printing Problems (continued)
Symptom Possible Cause Solution
To Next Page
Loading...
