30 Installation ENWW
Site requirements
Operating environment
The electrical and environmental specifications must be maintained to ensure the correct
operation of this printer. Consider the following points before installing the printer:
● Install in a well-ventilated, dust-free area.
● Install on a level, flat, and continuous surface that can support the printer’s weight. Make
sure all four printer feet are level. Do not install on carpet or other soft surfaces.
● Ensure adequate power supply circuitry (see “Electrical specifications” on page 20).
● Install where there is stable temperature and humidity, with no abrupt changes (away from
water sources, humidifiers, air conditioners, refrigerators, or other major appliances). See
“Operating environment” on page 21.
● Install away from direct sunlight, areas with vibration, open flames, ultrasonic heaters,
ammonia fumes, or magnets and devices that emit a magnetic field. If the printer is placed
near a window, make sure the window has a curtain or blind to block any direct sunlight.
● Maintain enough space around the printer for proper access and ventilation. See “Printer
space requirements” on page 31.
To Next Page
Loading...