70 Operation ENWW
Resets submenu
Items on the Resets submenu relate to returning settings to the defaults and changing settings
such as PowerSave.
The following table lists the settings and possible values. In the Values column, the default value
for each setting is the one with an asterisk (*) next to it.
Table 16. Configure device menu—resets submenu
Item Values Explanation
RESTORE FACTORY
SETTINGS
There is no value to
select.
Performs a simple reset and restores most of the factory
(default) settings. This item also clears the input buffer for
the active I/O. Restoring factory settings does not affect
network parameter settings on the optional HP Jetdirect
print server.
CAUTION: Restoring memory during a print job cancels
the print job.
CLEAR
MAINTENANCE
There is no value to
select.
Clears the PERFORM PRINTER [X] MAINTENANCE warning
message displayed when the printer has reached its
prescribed number of pages printed between regularly
scheduled maintenance operations. Appears only when
the maintenance interval has been exceeded
CHARGER CLEANED *NO
YES
● YES: Clears CLEAN POST CHARGER message.
● NO: Returns display to CLEAN POST CHARGER message.
POWERSAVE OFF
*ON
Turns PowerSave mode on or off. PowerSave mode does
the following:
● minimizes the amount of power consumed by the
printer when it is idle
● reduces wear on electronic components in the printer
(turns off the display backlight, but display is still
readable)
The printer automatically comes out of PowerSave mode
when you send a print job, press a control-panel button,
open a tray, or open the top cover.
You can set how long the printer remains idle before it
enters PowerSave mode. (See “POWERSAVE TIME” on
page 65.)
To Next Page
Loading...