Appendix A—Productivity tools 29
Settings tab
The Settings tab allows you to configure printer settings from your computer, such as default paper
size, and can be password protected. If the printer is networked, always consult with the printer
administrator before changing settings.
The Settings tab contains the following pages.
Paper Handling Configure paper handling settings from this page.
Printing Configure the I/O Timeout from this page.
Print Quality Use this page to configure color calibration and optimize settings.
Print Density Use this page to configure print density settings including contrast, highlights, midtones, and
shadows.
Paper Types Use this page to configure paper types.
Print Modes Use this page to configure print mode settings.
System Setup Use this page to set up system settings, including jam recovery, auto continue, display contrast,
and device language.
Service Use this page to start the cleaning mode and restore factory settings.
Networking tab
The Networking tab allows network administrators to control network-related settings for the printer
when it is connected to an IP-based network.
Note This tab will not appear if the printer is directly connected to a computer, or if the printer is
connected to a network using anything other than the built-in network port.
IP Configuration Use this page to set the IP configuration.
Advanced Use this page to enable network features such as SLP Config, DHCP, BootP, and AutoIP.
mDNS Use this page to set the mDNS. Use these settings to turn on or off Rendevous discovery.
SNMP Use this page to set SNMP protocols.
Password Use this page to set or change the Administrator Password.
Other links
This section contains links that connect you to the Internet. You must have Internet access to use any
of these links. If you use a dial-up connection and did not connect when you first opened the HP
Embedded Web Server, you must connect before you can visit these sites. Connecting may require
that you close the HP Embedded Web Server and reopen it.
HP Instant Support Connects you to the HP Web site to help you find solutions. This service analyzes your printer error
log and configuration information to provide personalized diagnostic and support information.
For more information, see page 30.
Product Registration Connects you to the product registration page on the HP Web site.
Order Supplies Allows you to order genuine HP supplies online.
Product Support Connects you to the support site for the printer, where you can search for help with a specific
problem.
To Next Page
Loading...