EasyManua.ls Logo

HP LaserJet 3015 - Sending a delayed fax

HP LaserJet 3015
414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sending a delayed fax
You can schedule a fax to be sent automatically at a future time to one or more people.
When you complete this procedure, the device scans the document into memory and
returns to the Ready state so that you can perform other tasks.
Note
If the device cannot transmit the fax at the scheduled time, that information is indicated on
the fax call report (if that option is turned on) or recorded in the fax activity log. The
transmittal might be halted because the fax-sending call is not answered, or because a busy
signal stops the redial attempts. (See
Setting print times for the fax call report and Printing
the fax activity log for more information.)
If you have set a fax to be sent at a future time but you need to add something to it, you can
send the additional information as another job. All faxes that are scheduled to go to the
same fax number at the same time are delivered as individual faxes.
To send a delayed fax
1. Load the document into the automatic document feeder (ADF) input tray or onto the
flatbed scanner (HP LaserJet 3030 all-in-one or HP LaserJet 3380 all-in-one only).
2. Press
MENU
/
ENTER
.
3. Use the < or the > button until Fax functions appears, and then press
MENU
/
ENTER
.
4. Use the < or the > button until Send fax later appears, and then press
MENU
/
ENTER
.
5. Use the alphanumeric buttons to enter the start time, and then complete one of the
following tasks:
If the device is set to the 12-hour time mode, use the > button to move the cursor past
the fourth character to set A.M. or P.M. Select 1 for A.M. or select 2 for P.M., and then
press
MENU
/
ENTER
.
If the device is set to the 24-hour time mode, press
MENU
/
ENTER
.
6. Complete one of the following tasks:
Use the alphanumeric buttons to enter the date, and then press
MENU
/
ENTER
.
Accept the default date by pressing
MENU
/
ENTER
.
7. Enter the fax number, enter the speed-dial entry, or press the one-touch key. (This
feature does not support undefined (ad hoc) groups.)
8. Press
MENU
/
ENTER
or
FAX
/
SEND
. The device scans the document into memory and sends it
at the designated time.
54 Chapter 3 Faxing (advanced) ENWW

Other manuals for HP LaserJet 3015

Related product manuals