C9148-90909 3 Operation 31
Navigation
By pressing the arrow navigation buttons, you can shift focus between objects on the control-
panel display to describe the document to be handled and the actions to be performed. A bold
border around a graphic object or a reverse video effect in a text list indicates the current focus.
Use the central
SELECT ( ) button to select menus.
Figure 9. Navigation buttons
Walk-up copy display
Use the walk-up copy display menu on the control-panel display to describe the original
document and to specify the actions to be taken and their parameters. The primary walk-up copy
display menu choices are:
● Describe Original
● Copy Settings
● Send Options
After power is turned on the MFP initializes and the top-level menu display appears when the
MFP is ready to process jobs.
Figure 10. Top-level control-panel menu display
The Describe Original menu is used for both digital-sending and copying. The other menus are
addressed in the “Walk-up copying” and “Sending to e-mail” sections in the use guide.
Status bar
The status bar is the uppermost line of available text on the control-panel display.
● The status line shows both product-status messages and user prompts. When the product is
idle, this line displays Ready To Copy, Accepting Copy Jobs, or Ready. During scanning, the
line might read Scanning Page x. During copying, you might see Data Recieved
Processing Job. Error messages are not communicated on the status line, but they appear
in a text box overlay that blocks normal display views until the message is cleared.
● The copy count shows the number of copies selected. This selection is made using the
keypad. Acceptable values are from 1 to 99.
Select
Move up
Move down
Move right
Move left
To Next Page
Loading...
